Cerio TD-04BT Multi Gigabit 4 Channel BT/Class6,7,8 PoE PD Test Loader (19 inch/1.5U Base)

TD-04BT

Highlight Features

• Complying with IEEE 802.3bt standard.
• Each independent channel supports Ethernet Pass Through data transmission.
• Supports 4 PoE load testing channels with switch exchange, each channel supporting a maximum of 71W PoE load testing.
• Supports 3 PD Class level : PD Class 6 (51Watt), Class 7 (62Watt) and Class 8 (71Watt), with LED display of the load level.
• Supports both PoE End-span (Type-A) and Mid-span (Type-B) modes.
• Supports PD Class level switching function, with DIP Switch allowing switching between PD Class 6 (51Watt), Class 7 (62Watt) and Class 8 (71Watt) levels.
• High reliability metal casing design, supports 19¢â‚¬³ rack installation.

Product Application

TheCERIO TD-04BT PoE PD Test Loader is specifically designed to test and verify PoE PSE equipment. It is mainly used to test the performance and reliability of PoE PSE network devices. This PoE PD Test Loader can be used in various scenarios, such as:

• Testing and acceptance by contractors: With the popularity and widespread use of PoE, the system providers can perform pre-acceptance testing and even maintenance on equipment, becoming an essential tool for network administrators to test, verify, and accept.
• Network environment testing : During network construction and debugging, using the PoE PD Test Loader to test PoE devices can ensure that operate normally, greatly reducing system construction and labor costs, and enhancing network security.
• Production testing : During the production process of PoE PSE network devices, using the PoE PD Test Loader can conduct comprehensive testing to ensure performance and reliability meet customer requirements, improve production efficiency, optimize production processes, and reduce production costs.
• Product development testing : Using the PoE PD Test Loader can help R&D staff accurate test results in a short time during product verification and testing.
• Troubleshooting : When the PoE system fails, use PoE PD Test Loader to test equipment, which can help identify the cause of the failure and repair it, helping engineers to quickly troubleshoot and reduce time and labor costs.

Hardware Overview

• 

• Standards & Hardware Specifications
  Standard	IEEE 802.3bt Power over Ethernet (PoE++)
  Port Configuration	4 RJ45 Ethernet Pass Through Data Ports 4 RJ45 PoE PD Ports 1 RJ45 Switch Port (By optional)
  PoE Type	End-span (Type-A): PIN 1/2,3/6 Mid-span (Type-B): PIN 4/5,7/8
  Data PIN	PIN 1/2,3/6 & 4/5,7/8
  Power PIN	PIN 1/2,3/6 or 4/5,7/8 (Power + Data Pin)
  Ethernet Connector	RJ45 (LOAD POE) x 4 RJ45 (DATA LINK) x 4
  DIP Switch	All 4 test channels support DIP Switch, switchable PD Class (Class6, Class7, Class8) three levels
  Fan Design	Ultra-Quiet Dual Fan Cooling Design
  LED	Class6/BT (51W) Output : Status x 4 Sets Class7/BT (62W) Output : Status x 4 Sets Class8/BT (71W) Output : Status x 4 Sets
  Environmental & Mechanical Characteristics
  PSE Test Applicable Type	Active PoE IEEE 802.3bt Passive POE
  PSE Input Voltage	44~57V
  POE Power Output	51 +/- 1W 62 +/- 1W 71 +/- 1W
  (Single Signature PD)/Max. Power	Class 6 : 51W Class 7 : 62W Class 8 : 71W
  Operating Temperature	0° to 40° C
  Storage Temperature	-40° to 70° C
  Operating Humidity	10% to 90% non-condensing
  Storage Humidity	10% to 90% non-condensing
  Dimension ( W x H x D )	441 x 281 x 66 mm
  Weight ( kg )	TBD
  Production Location	TW
  Package Contents
  TD-04BT Main Unit	x1
  Quick Installation Guide Booklet	x1
  Power Cord	x1
  19¢â‚¬ Rack Mount Brackets	x1
  Warranty Card	x1