Jetway JNC96-525-LF Mini-ITX Fanless Motherboard, Intel Atom D525, Intel NM10 chipset

This motherboard is new and unused but is pulled from the barebones systems. The board includes the internal power cable to power the accessories, SATA cable, and I/O shield. Some may come with the driver disk.

Specification

Jetway NC96 Mini-ITX Motherboard
Processor	2nd Generation Intel® Atom Dual Core D525/D510/D410 (Formerly Pineview-D)
Chipset	Intel NM10 (Formerly Tiger Point) @ 2.1W
Memory	2 x DDR2 667/800 DIMM slot (up to 4 GB)
Graphics	Intel GMA3150 Integrated Graphics
Audio	Realtek ALC662 5.1 Channel Audio
LAN	1 x Realtek RTL8111DL PCI-E Gigabit Ethernet
Storage	Intel NM10: 2 x SATA2 3Gb/s Connectors JMicron® JMB363 Controller: 2 x SATA2 3Gb/s port with RAID 0, 1, JBOD & 1 x UltraDMA 133/100 for up to 2 PATA devices
Super IO	FINTEK F71869E
Back Panel Connectors
1 12V DC Jack 1 PS/2 Mouse 1 PS/2 Keyboard 1 Parallel 1 Serial 1 VGA (up to 2048x1536) 4 USB 2.0 1 RJ45 LAN (10/100/1000) 3 3.5mm Audio
Onboard I/O Connectors
1 PCI Slot 1 44-pin IDE Connector 1 mini PCI Express x1 Slot 1 Serial header (RS232/RS422/RS485) 4 SATA2 3Gb/s Connectors 2 USB Pin Headers for up to 3 additional USB 2.0 Ports 1 18-bit Single Channel LVDS header/inverter 1 9-pin Audio header 1 4-pin CD audio-in header 1 GPIO header 1 Front Panel header 3 Fan headers 1 4-pin Power Connector
Power Supply for NC96
External Power Supply – the board can be powered with a 12 V external power supply though a DC connector on the back panel. The rear 12 VDC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is 12 V and the shell is GND. Based on power consumption test results, the recommended power rating is 60 W (12 V/5 A).